Skis might hog the limelight, but ask almost any ski professional and they will tell you that boots are the most important piece of ski gear. “There are two reasons,” says Larry Houchen, owner and operator of Larry’s Bootfitting in Boulder, CO. “Boots are the only part of the gear that touches you, and boots transmit what you want the skis to do. So if they don’t fit, you can’t communicate properly to your skis.” 

Any skier who has logged days during the last millennium will have memories of bruised feet and shins, screaming hot spots, cement-like flex indexes and parking lot spills on slippery soles. Addressing those gnarly problems, this season celebrates three main boot technology stories: customization, walk modes and hybrid models that bridge the gap between downhill skiing and alpine touring. “Those three things are the main reasons to get new boots if you haven’t recently,” says Houchen. “Add custom insoles to new customization technology and you get the best fit possible without creating problems.” 

1. Customization

The biggest trend in ski boots this season is customization and adaptability of shells and liners. Some models have heat moldable shells and liners while others have strategically-designed shells that make bootfitting tweaks more effective. Fischer, arguably one of the pioneers of the “adaptable shell,” uses Vacuum fit technology, which can make the boot smaller by molding to the foot’s shape after being heated. Fischer’s proprietary plastic retains a consistent flex characteristic even during temperature fluctuations. “Our World Cup athletes were looking for a more consistent flexing material for racing,” says Matt Berkowitz, director of alpine marketing and product for Fischer. “They were racing in Europe and then Colorado—big difference in temperature. We developed Vacuplast and found it was 15 percent lighter, more elastic and also you could form it at a lower temperature than PU to beat the memory effect*.” 

Other companies use traditional PU (polyurethane) shells, but with technology that allows bootfitters to make more effective customizations. Tecnica’s C.A.S. (Custom Adaptive Shape, found in Cochise and Mach1 models) includes an anatomically-shaped liner that’s preshaped to fit important areas of the foot, such as the anklebone. It can also be heated, easily punched or grinded. The shell also has areas boot fitters can heat or grind to customize the fit. 

Nordica’s Custom Cork technology uses the properties of cork to “mold” around the foot while Head’s new Vector EVO models have heat-moldable shells and liners, no oven needed. Salomon’s 360 Degree Custom Shell and 3D liner offer foot “wrapping” with heat-moldable shell and pre-shaped liner around the ankle and heel. Rossignol’s Sensor Grid makes a gridded pattern in the shell that provides wrapping of the foot and ankle. 

Since no two feet are alike, many manufacturers have increased their last (the inner shape) size offerings this season. Boots with 100-mm lasts in the all-mountain category are the meat of the market, but companies are branching out: Rossignol adds three new last sizes (98, 100, 102) in the Allspeed series, Tecnica now offers a lower volume Mach1 (98), Atomic’s Hawx Magna expands to a 102-mm last, Full Tilt adds a 102-mm last to the Descendant series, and Alpina presents a 102-mm last to its Elite series. 

*Memory effect has to do with how the plastics change in ski boots according to temperature changes (like getting super stiff in cold weather and very soft in the spring). 

2. Walk Mode

Be it car to bar or hiking a knife-edge ridge, a walk/hike mode can help by increasing mobility combined with the complete “locked down” feeling you need for alpine turns. This season, freeride or “adventure” boot models make up a large segment of the market, and nearly every company offers boots in this category. “The market introduced this technology 10–15 years ago but perception wise it wasn’t cool,” says Thor Verdonk, Director of Product Development for Rossignol/Dynastar/Lange/Look. “Freeride made it cool. The hike mode increases skiability and adds a real benefit to consumers.” 

Verdonk came from the race department, where he worked on the boots of 13-year-old Lindsey Kildow (a.k.a. Vonn) as well as others. “I learned a lot about boots from the greatest athletes around, including Lindsey, Julia, Ted and Daron Rahlves.” In fact, Lange’s V-lock system (found in Lange’s XT series) is an example of reverse engineering from the race world. “The power of a ski boot comes from the upper cuff driving into the lower cuff. We realized that we could put a V in there for more range of motion for hiking or walking, while the Power V-lock secures it down like a traditional boot,” says Verdonk. 

Walk mode technology varies from company to company. K2’s Synchro Interlock, for example, has a rivet-free design that cuts down on friction for walk mode. The freeride Pinnacle series adds lightweight, rockered Vibram soles this season. 

3. AT Hybrid

The AT (alpine touring) Hybrid category is loosely defined as boots with a swappable DIN and Vibram soles and has shown tremendous growth in the past few seasons. In fact, according to SIA (Snowsports Industries America) market research, alpine touring gear sales increased 18 percent this past year, seeing a 34 percent boot sale increase in women’s AT boots alone. 

This group doesn’t just visit the backcountry; they are also resort uphill/downhill skiers in it for the workout or first tracks. Scarpa, the Italian company known for mountaineering gear, successfully crossed over to alpine with the Freedom line. The Freedom RS has 130 flex (notably because touring boots had the reputation of being too soft for aggressive downhill turns), lightweight plastic (made out of castor plant oil instead of petroleum) and Vibram Mountain Plus soles that can be swapped out for Vibram Mountain Piste soles for alpine compatibility. 

Other backcountry brands have introduced new hybrid models as well. Dynanfit Radical CR and Black Diamond women’s Siva have hike modes and 100 plus flex indexes. Salomon and Scott are also introducing new super lightweight models with the Quest TR 110 and Cosmos II, respectively. The Dalbello Krypton Lupo TI has tech inserts; replaceable rubber heels and toes provide extra grip. 

The acronym WTR is new to the ski boot lexicon. It means “walk-to-ride,” and essentially includes a relatively soft alpine sole with rocker at the toe piece (think back to where flat, hard boot sole meets icy parking lot). Rossignol leads the pack with the Alltrack W, which has walk-to-ride rockered soles to make walking easier. 

The challenge with rockered soles is that the binding toe height needs to be adjusted to accommodate the rocker (if the toe plate of the boot doesn’t work properly with the AFD (anti-friction device) piece, you could pre-release). New bindings to the rescue with raised AFD devices—and along those lines, bindings and boots are starting to offer à la carte options of swappable soles to serve a variety of mountain adventures.